How to solve the problem of gravure printing ink

The difference in the raw materials is very large. Even if the same pigments are treated differently, the nature of the pigments varies greatly. This requires the formulator of the composite ink to design the composite ink. Full of this difference. Since the inks of various colors have different requirements in the printing process, when designing the formula, the proportion of various synthetic resins in the ink formulation is designed according to the characteristics of the pigment, that is, the oil absorption amount, the coloring power, the dispersion property, and the like. This can be determined by experimentation.
1. In general, severe fog problems can often be solved by improving the fluidity of the ink, which is due to improved ink flow, that is, low viscosity printing. Reduce the impact of the ink on the scraper so that the scraper can clean the blank portion of the ink very cleanly.
2. Scientific application of body pigments. Adding body pigments (such as ymt ultrafine powder, ymt ultrafine barium sulfate, cc-65 powder, fh-95 powder, etc.) to the formula is not only a question of reducing the cost of the test, but after adding the body pigment, it is filled in The resin encapsulating the pigment further enhances the body of the ink, reduces the viscosity of the ink at the same printing viscosity, and improves the squeegee performance of the blade.
3, the most current use of wax powder and OK-412 matte powder to solve the fog problem. Wax powder and matte powder OK-412 is an effective auxiliaries for reducing fog problems. The particles are easily released on the surface of the ink, which enhances the squeegee performance of the blade. However, many manufacturers add wax powder and OK-412 matte powder method, which often does not solve the problem of fog problem. It is recommended to make wax powder and OK-412 matte powder into semi-finished products, and the fineness of ink grinding is qualified. After that, it is added at a high speed and the polishing is not performed, which reduces the effect of solving the fog problem.
4, the compatibility of the pigment and the synthetic resin is improved by using a suitable wet dispersing aid. The purpose of adding a wetting and dispersing aid to the formulation is to solve the problems of the formulation system, including poor pigment dispersion, poor coating of the pigment by various synthetic resins, and poor stability of the system itself, and these problems are solved. Poor is often caused by the fog problem

rotogravure printing machine price
rotogravure printing machine manufacturer
gravure printing process steps
gravure printing examples
what is gravure printing used for
rotogravure printing cylinder
gravure printing products
gravure printing companies